The winners are

1st Place LesleyAnne B. (aka LAs-Cricut) and her Winter Book

2nd Place is Katie C. and her 2 page layout

3rd Place is Shelia with framed Christmas decor.


Thank you all for participating I loved seeing all the work and I had fun putting this together. I think after the holidays busy rush is over and everyone is not so busy (and we have a new year of donations available to businesses I will do another one.

Katie C.

I added the pictures to this one! Sorry I’m so stupid! The house is the left hand page and the ice skating page is the right hand page. Thanks again!

Materials Used:

Cricut

Gypsy

Carts – winter woodland, Christmas, gypsy wandering and gypsy font

Paper trimmer

Pop dots

Ink

Adhesive

Zig 2 way glue

Stampin up markers

Brayer

Scissors

Liquid appliqué

Paper glaze

Heat gun

Directions:

1. Cut 7 snowflakes from gypsy wandering @ 1”

2. cut snowman from winter woodland @ 3” with all pieces and assemble

3. cut sign from Christmas @ 2.5” with all pieces and assemble

4. cut monogram letter from gypsy font @ .963” and attach to sign

5. cut lamppost from Christmas @ 3” with all pieces and assemble

(I like to ink my pieces to add a little flare.)

6. cut house from winter woodland @ 7” with all pieces and assemble

7. cut 5 snowflakes from gypsy wandering @ 1”

(I like to use my brayer to rub the pieces of paper onto the mat before cutting.)

8. cut tree @ 6.5” and 5.5” from Christmas and assemble

(snow is done with liquid appliqué that has been heated with a heat gun.)

9. cut “The Magic of Winter” from winter woodland @ 3.5” with shadow and layers and assemble

10. cut snowman from winter woodland @ 3.3” with layers and assemble

11. cut trees from Christmas @ 6” and assemble

12. cut ice skater from winter woodland @ 3” and assemble

13. cut circle from gypsy wandering @ 8.7” x .6”

14. assemble pages using the picture as a guide

15. cut two photo mats @ 4x4 and 4.5x4.5”, ink and assemble

16. wrap ribbon around mats and tie a bow

17. cut a mat to measure 4x6 and 4.5x6.5”, ink and assemble

18. wrap a ribbon around mat and tie a bow

19. add mats to layout

Dawn,

I just wanted to thank you for doing this. It was a lot of fun to participate in. You are such a sweetheart!

Brenda C.

Hi Dawn here are the directions for my item for the contest,

first I painted a 7"by 9" canvas using white, red and brown paint
then I cut out the stick from the pagoda cart and layered with foam dots, the flowers were cut first in pink then in vellum and layered, then using a stylus I ran it over the glued flowers to give them some dimension. then I cut out a butterfly from gypsy wanderings 2 times, once in the pink and one time in vellum, i then only adhered the vellum to the bottom to give it some dimension, then I cut out the words I welded on my gypsy using the gypsy font live laugh love, then glued it on the bottom. All other items were then glued into place.
My item I called it "live laugh love"

Shelia M.

Materials: 4 sheets of 12x12 cardstock/paper your choice of color.

1 Sheet 8 1/2x11 white cardstock.

1 small 5x5 scrap paper

Glue

skittles, diamonds amount per taste

frame of your choice - I used CM as after season over I will insert page in my scrapbook to start Christmas pages.

Carts: Gypsy Font, Gypsy Wonderings, Joys Of The Seasons

Worked design on a 12x24" mat on the Gypsy to allow more room to maneuver letters and switched to 12x12 after completed.

1. Outline square at 8", surrounded by shadow letters from GF at 2" high on the page 1 of my LO. All letters welded together. Many times letter widths

were changed to make the word fit.

2. Using the cutout GF at 2" height form letters in a square. This time adjust each letter to individually place to insure perfect

shadowing, again many letters will need to be adjusted to fit within the outline letters. I did weld letters so not every letter is placed individually.

3. Another square is made this within the 2nd page this time at 7 1/2" allowing it to float on page and background square to show through as a shadow.

4. On page 3 on my gypsy I used JOTS for a light piece of greenery at 3.64wx1,12h forming a square centered over the prior two welding it together for one

cut. I also cut 4 strips at 1/4" wide from this left over paper so don't throw out.

5. On page 4 I made the words King 1.25h and Lord 1.5h to hang on frame. Also on separate sheet, The Christmas story from Luke was printed on the 8

1/2x11 sheet of paper.

6. Put together, shadow letters first, ornately cut letters next, colored square place on top of shadow square. Then place 1/4" colored strips within both

squares so the shadow color doesn't overwhelm. Add greenery and place diamonds and skittles to your preference. Then center Bible passage under

the squares as if framed.

7. Flip over adhere double sided foam squares and attach to your background paper. Frame or place in your scrapbook.

Pam R.

Santa Collage

(A little jazz on top of the fireplace mantle)

Cartridge used:

Gypsy Font, Gypsy Wanderings, Christmas Solutions

Materials:

12 x 12 cardstock papers - 1 black, 1 white, 1 pattern (from K & Y) Life’s Journey

Perfect Pearls

Perfect Ink Refresher

Brush to apply Perfect medium

Water and mist spray

Stickles

White glitter

Adhesive - pop dots, zip glue (or strong acid free liquid glue)

And of course the Gypsy and Cricut

Instructions:

You can use another dark pattern paper for Santa but I preferred to use the perfect medium to get the iridescence, so that with lights on it will really shine. Weld the Santa (CS), sleighs (shadow feature from CS) and the letters T, O, T, O, W, N (GF) in the gypsy. Then cut with black 12 x 12 cardstock. Also in the same file add letters H,O, H, O, H, O (GF - you can wed if you want) . In the next page of the gypsy file using the Santa template as guide weld together snowflakes(GW) to form beard. Add a reindeer (GW) and resize near the pompom of Santa’s cap. Weld together mistletoes (CS) and an ornament(CS) to form Santa’s nose and beard. Also add 2 heart(GW) and a musical note(GW) sizing it to form the eyes and brows .Weld letters (from GF) S, A, N, T, A together; C, L, A, U, S together; I, S together and C, O, M, I, N, G together resizing and arranging to go in the cap area of Santa. Also add the sleighs (CS) regular keeping it one or two size smaller than the ones in previous page in Gypsy file. Cut all this in white cardstock.

Take the black Santa cutout and spray it with perfect ink refresher and work it in. With a brush apply the different perfect pearls trying to add more of the reds near the cap and blues near the beard. After you finish applying spray with a water very lightly to set. Allow it to dry (you can also hasten the process with heat tool ).

Add glitter and stickles to the white pieces and allow to dry. Stick it on the black Santa base in the respective places using zip glue and pop dots to give dimension (Caution: a strong glue is needed to stick the pieces on top of perfect medium. You might also need to apply on the back of the pop dots to make it stick). Then glue the black decorated Santa to the pattern paper of your choice. I have used pop dots to give more dimension. Add the stickled words HO HO HO in it with tiny pop dots. Apply some more stickles to the background if you want. You can mat it and add to a frame (which I have not done yet) and put it up on the fireplace mantle during Christmas time.

Happy Holidays!

LesleyAnne B.

Hi Dawn,

attached are my pictures for the G contest from the cricut MB. Below follows my cuts. Thanks for the opportunity!

xxxxxxxxxxx

The following cartridges were used:

Gypsy Wandering (GW)

Gypsy Font (GF)

Accent Essentials (AE)

Winter Woodland (WW)

Joys of the Season (JOS)

Using the Gypsy, create the following cuts:

page 1:

3.50 x 5.50 AE rounded edge rectangle welded with two 1" tall WW birds and chipmunk. Layer with birds in brown and blue, rabbit in grey, chipmunch in dark brown.

Cut 1" tall GF "2009" welded and rotated 90 degrees for cream shadow, repeat in GF in red.

page 2:

4.50 x 5.50 AE rounded edge rectangle welded with 3.80 x 5.28 JOS shadow Christmas tree. Layer with brown base, green tree, white snow. Glitter and accent with crystals.

page 3:

5.50 x 5.50 AE rounded edge rectangle welded with 3 JOS shadow snowflakes. Layer with light blue and white snowflake accents

page 4:

6.50 x 5.50 AE rounded edge rectangle welded with 2.82 x 3.00 GW shadow snowman

layer with blue blackout, white snowman, black hat and arms, red scarf and hat accent. Colour in nose, eyes, mouth with marker.

page 5:

7.50 x 5.50 AE rounded edge rectangle welded with 3.26 x 3 WW shadow Horse

layer horse with black base, brown body, green harness

cut 5.52 x 3.00 WW Sleigh in gold, layer with dark green, accent with holly

create 2 tags: 4.11 x 2.66 WW MgcWntr tag-shift green twice, layer one with 3.99 x 2.66 WW MgcWntr tag

page 6:

8.50 x 5.50 AE rounded edge rectangle welded with 2.52 x 5.50 WW shadow Bldg1

layer house with yellow base, tan exterior, blue gables, white snow layers

page 7:

9.50 x 5.50 AE rounded edge rectangle welded with 5.50 x 2.25 WW shadowed saying "winter woodland" rotated 90 degrees

layer with 4.60 x 2.23 WW saying "winter woodland"

To finish: add accents to each page, including journaling and picture mounts. Bind with 3/4" Bind it all; tie off with red, green and white ribbons.

Vicky W.

BASIC CARD ~ Thinking of You

Cartridges used ~ Gypsy Wondering, Gypsy Font, and George

DIRECTIONS:

1/4 cut of pattern paper

3-D Dots

1 Skittle

Cuts from Gypsy Wondering ~ "Thinking of You"

Cuts from Gypsy Font ~ Hearts

Cuts from George ~ Rectangle

Use color of your choice for creating card

1. Cut 1/4 of pattern paper (your choice); glue on card using a spray adhesive for faster application.

2. Cut designs using Cricut and your Gypsy.

3. Glue rectangle (using spray adhesive) and place in the center of card.

4. Glue the "Thinking of You" (burgandy onto white) using spray adhesive.

5. Add the 3-D dots to the back of shadowed "Thinking of You" and place on the center of the rectangle.

6. Spray adhesive glue to the hearts, cutting one off and placing in top left corner and place other two hearts in bottom right corner.

7. Glue skittle on the center of the flower.

Judy T.

Cut Ice Cream Box ( Sweet Treats) out at 10 inches
then decorate
Happy Birthday (Gypsy Wandering) at 2inches
Cupcake (Gypsy Wandering) at 1.50 iches
Taylor (Gypsy Font) at 0.75 inches


xxxx


There is one more picture to this entry that I am trying to get uploaded. I may have to forward in an email to each of you if this struggle lasts much longer

Mary M.

Well Dawn (also the judges) Thank you so much for all your hard work organizing this contest. The entry I am submitting is a party bag for little ones to celebrate the New Year complete with “party favors”. Here are the Instructions:
Supplies: cartridges Gypsy Wanderings, Gypsy Font, TBBM, Celebrations, and Stand and Salute.
Cardstock: black, blue white Stickles: black diamond, diamond,
MS glitter: copper, antique gold, dark blue, waterfall
Antique silver Stamps: Jan. M’s $1 stamp, Peachy
Silver brads and ribbon Keen Winter faces
My Mind’s Eye “sweet dreams paper” using the blue snowflakes
Best Occasions-prismatic paper pack from Walmart
Pop-ups and rhinestones
Instructions:
From TBBM you will select the inch bag, window cut at 7” on pg.128. I then used the GF to write the #2010 @ 1.25 shadow feature and then positioned them diagonally in the window frame. After careful positioning hit weld then make a 2nd page and repeat the #’s only do not use shadow feature .I used the Mind’s eye card stock for my base and the prismatic for the #’s on second page. After cutting, cut a piece of vellum and adhere to inside of bag with your favorite adhesive. Glue numbers to the shadow base on bag. Score bag. I used large brads spaced ¾” in from the score marks front and back. At this time you may stamp lower right corner of bag with appropriate stamp then finish putting bag together. I like to use terrifically tacky tape on boxes and bags. (Say that 3x’s fast lol).
Embellishments: Snowman was cut from GW at 2.5 His hat and horn-blower were cut from celebrations cart at 1” both for the shadow and main cut. Face was stamped with Peachy Keen stamps and chalk added to cheeks, rhinestones for buttons and a piece of ribbon for the scarf. Then I added stickles to hat and party
favor. Finally rather than snowflakes I decided to use the fireworks from Stand and Salute to make it a real party! They are cut @ 1.03 high and 1.27 wide. I cut the shadow from the prismatics paper and the reg. cut from plain white cardstock. Then, for that extra sparkle I ran the white cardstock thru the xyron twice, front and back and then alternated the 3 types of MS glitter to get a burst of color. Mounted them on pop dots, added a few more stickles on #’s and Jan stamp. Attach ribbon. Voila you’re done. I intend to fill them with Lindsor chocolates, horn-blowers, bubbles of course a few glow sticks so my grandkids can enjoy the party as well. Hope you enjoy this, xxxxx

Rebbeca F.

Hi Dawn,

Thank you so much for organizing this contest. My name is xxxxx My cricut.com xxxxxxx. This is the first scrapping contest I have ever entered, so I thought I would give it a shot. I just got my gypsy and am pretty new to scrapping, but I really like how this turned out. Hope you like my "Family Time" clock. I have attached my three pictures. Here are my directions....

1. I bought an old clock at a garage sale.

2. I traced a 12 inch circle onto a piece of color patterned cardstock (for this particular clock, I used a variety of two sided cardstock from June Bug) to cover the clock face. (I used the clock cover to trace the circle to fit. I have a babybug, so I cannot cut a 12 inch circle. If you have an Expression, you could easily cut this circle without tracing.)

3. I used a pen cap to trace, and cut out, using an exacto knife, the center circle cutout so that the clock hands could fit through the center of the circle. You could also use a circle punch if you have one.

4. Using my gypsy, I cut the numbers for the clock using Gypsy Font in 2 inches height.

5. I also used my gypsy and Gypsy Font to shadow the numbers for the clock. For 10, 11, and 12, I welded the numbers together to make them look more uniform. I then glued the font numbers to the shadow.

6. Then I used my gypsy and Gypsy Wonderings to cut "Family" and "Time" in 2 inches height (they are already welded in this cartridge). (midnight blue Bazzil cardstock) Using a silver gel pen, I dotted the font to make it stand out and give a small embellishment.

7. I also used my gypsy and Gypsy Wonderings to cut the shadow for "Family" and "Time". I then glued the font onto the shadow.

8. Using my gypsy, I cut the center spotted circle design, 4 inches height, from the Accent Essentials cartridge. (For this clock, I used midnight blue Bazzil cardstock).

9. Using my gypsy, I then used Doodlebug cartridge for the "wavy line hearts shadow" and the "basic heart" 1.5 inches height, that goes in the middle of the wavy heart. I outlined the regular heart with a black marker to make it "pop off" the shadow background

10. I glued all items down using scrapbook adhesive glue.

11. I put batteries in the back of the clock.

12. I replaced the plastic cover over the clock.

13. I hung the clock in our family room.

I really enjoyed re-furbishing this old clock. I love the vibrant colors and design of the paper I chose. I hope you enjoy it too.

Thank you so much for your consideration.

Promise to make it prettier

this was just set up quickly so that I could get this rolling before the holidays took all my time.

I promise to get to this Wednesday night or Thursday morning so that it looks a little nicer.

Prizes that are for contest

Ok Judges we have

2 cricut cartridges
25.00 gift certificate to local craft shop with online ordering
150.00 in cash donations that can be divided anyway and gift cards purchased by winners choice
and the following items were donated for the contest